RestauNax Logo
Home FoodPricingAffiliate
Operations

Restaurant Labor Cost Percentage: Formula, Benchmarks and How to Lower It

Labor cost percentage is total labor cost divided by sales. Here is the formula, what belongs in it, a worked example, the published medians by restaurant type and the steps that lower it without hurting service.

November 14, 2026

10 min read

Restaurant labor cost percentage is your total labor cost divided by your total sales, times 100. In the National Restaurant Association's latest operations survey, labor including benefits was a median 36.5% of sales at full-service restaurants and 31.7% at limited-service restaurants in 2024. Your own target depends on your service style and your food cost.

This guide covers the formula, what counts as labor, a worked example, the published benchmarks and the practical ways to lower the number.

How do I calculate restaurant labor cost percentage?

You calculate restaurant labor cost percentage by dividing total labor cost for a period by total sales for the same period, then multiplying by 100.

Labor cost percentage = (total labor cost ÷ total sales) × 100

Three rules keep the number honest:

  1. Match the periods. A week of labor against a week of sales. A pay period that ends on a different day than your sales week will distort the result.
  2. Use net sales. Leave out sales tax and tips. Neither is your revenue.
  3. Use the full cost of labor, not just hourly wages. The next section lists what belongs in it.

You can run the numbers in the free labor cost calculator.

What costs count as labor?

Labor cost is everything you pay because you employ people, not only what shows on their paychecks. A complete figure includes:

CostInclude it?Notes
Hourly wagesYesFront and back of house, including training hours
Overtime premiumYesOften the easiest part to reduce
SalariesYesManagers and chefs, spread evenly across the weeks they cover
Employer payroll taxesYesThe employer's share of Social Security and Medicare, plus unemployment taxes
Workers' compensation insuranceYesUsually billed as a rate on payroll
BenefitsYesHealth insurance contributions, paid time off, staff meals if you track them
BonusesYesSpread over the period they reward
Customer tipsNoTips are paid by guests, not by you. The payroll tax you owe on reported tips is a labor cost
Owner's drawDependsIf an owner works a position you would otherwise pay for, include a fair wage so the number is comparable
Swipe to see more →

The published benchmarks below use "salaries and wages (including benefits)". If you compare wages alone against them, your restaurant will look better than it is.

What is the average restaurant labor cost percentage?

The best public figure comes from the National Restaurant Association's Restaurant Operations Data Abstract, which is based on financial data from more than 900 restaurant operators. The Association's summary of the labor figures (October 2025) reports these medians for 2024:

Group (2024 data)Full-service restaurantsLimited-service restaurants
All respondents36.5% of sales31.7% of sales
Operators that made a pre-tax profit34.2% of sales30.0% of sales
Operators that reported a loss42.9% of sales34.1% of sales
Swipe to see more →

Salaries and wages including benefits, median share of sales. Source: National Restaurant Association, figures for 2024, published 2025. Checked November 2026.

Two things stand out. Limited-service (counter service, quick service and fast casual) runs about five points below full service, because guests do part of the work a server would do. And the gap between profitable and unprofitable full-service operators is almost nine points of sales.

The Association says its data is not meant to set standards or goals for an individual restaurant. Treat the medians as a reference point, not a grade.

What is a good labor cost for quick service vs full service?

A good labor cost is one that leaves room for profit once food cost is added. That is why many operators watch prime cost, the total of cost of goods sold and labor, more closely than labor alone.

A common rule of thumb, stated by the accounting firm ORBA in a 2023 benchmarking article, is that prime cost should not exceed 60 to 65% of sales for full-service restaurants and 55 to 60% for quick-service restaurants.

So a steakhouse with a high food cost needs a lower labor percentage than a pizzeria whose ingredients are cheap. A scratch kitchen that butchers and bakes in house will carry more labor and less food cost than one that buys prepared product. Both can be healthy. See restaurant prime cost for the full method, or use the prime cost calculator.

Worked example: one week at a neighborhood restaurant

A casual full-service restaurant has net sales of $28,000 for the week.

Labor lineWeekly cost
Hourly wages, including $300 of overtime premium$6,900
Salaried manager$1,300
Employer payroll taxes and workers' compensation$820
Benefits$380
Total labor cost$9,400
Swipe to see more →

Labor cost percentage = $9,400 ÷ $28,000 × 100 = 33.6%

If the owner had counted hourly wages only, the result would have been 24.6%, nine points too low.

The same week, staff worked 520 hours in total. Sales per labor hour = $28,000 ÷ 520 = $53.85. This second number is useful because it does not move when wage rates change, so it shows whether you are scheduling better or just paying differently.

Why should I measure labor by day and by shift?

A weekly percentage hides where the money goes. A restaurant can be well staffed on a busy Friday and overstaffed on a slow Tuesday, and the weekly average blends the two.

ShiftSalesLabor costLabor %
Tuesday lunch$900$38042.2%
Friday dinner$4,200$1,05025.0%
Swipe to see more →

The Friday team is not the problem. The Tuesday lunch is. You find this only by comparing labor to sales for each shift, which is why a schedule that shows its cost against expected sales is more useful than a payroll report that arrives two weeks later.

How do I get my labor cost down when it is over 50%?

A labor cost over 50% of sales is almost always a sales problem, a scheduling problem or a counting problem. Work through them in this order.

  1. Check the math first. Confirm that sales exclude tax and tips, that the labor period matches the sales period, and that a one-off cost such as a large bonus or opening-week training is not sitting in a single week.
  2. Separate fixed from variable labor. Salaries do not shrink on a slow week. Work out salaried pay as its own percentage of sales. If it takes up most of your labor target before a single hourly shift is scheduled, the restaurant is carrying more management than its volume supports.
  3. Find the worst shifts. Use the by-shift table above. Cutting one person from five slow shifts does more than trimming fifteen minutes from everyone.
  4. Stagger start times. Bring people in when the work starts, not when the doors open. A cook who starts at 10:00 for an 11:30 rush costs 90 minutes that a prep list might not justify.
  5. Stop early clock-ins and late clock-outs. Ten minutes at each end of a shift for twelve people is four hours a day.
  6. Remove overtime by design. Overtime is usually a scheduling choice. Spread the hours or add a part-time shift.
  7. Look at opening hours. If a daypart never covers its own labor, shorten it or close it.
  8. Raise the sales side. A new or seasonal restaurant can have reasonable staffing and still run over 50% because sales are low. Until sales grow, run the leanest safe crew and build direct orders through online ordering.

How do I lower labor cost without cutting service?

You lower labor cost without cutting service by removing hours guests never see, not the hours in front of them.

  • Schedule to a forecast. Use the same weekday's sales from the last four to six weeks, adjusted for weather, holidays and events. The restaurant scheduling tips guide shows the method.
  • Cross-train. A host who can run food and a cook who can work two stations let you run one fewer person in the slow hours.
  • Move prep to slow periods so the rush team is smaller and faster.
  • Let guests do the ordering. Online ordering, QR ordering at the table and kiosk mode take order entry off your staff during peaks.
  • Simplify the menu. Items that need their own station or long prep add labor that food-cost math never shows. See menu engineering.
  • Reduce turnover. Every replacement costs training hours at full pay and low output. The restaurant staffing guide covers hiring and retention.
  • Send people home on a rule, not a mood. Decide in advance what sales level triggers the first cut.

How should I adjust when the minimum wage goes up?

Work out the dollar effect first, then decide how to split it between prices, hours and productivity. The arithmetic is simple.

Suppose ten hourly employees average 30 hours a week and each gets a $2.00 raise. That is 300 hours × $2.00 = $600 a week, before the extra payroll tax on those wages. On $28,000 of weekly sales, that is 2.1 points of labor cost.

In the worked example, labor would rise from $9,400 to $10,000. To hold the percentage at 33.6% through price alone, sales would need to reach about $29,790, an increase of roughly 6.4%. You do not have to take all of it in price. A balanced plan is a smaller price increase on the items guests are least sensitive to, plus an hour or two cut from the weakest shifts, plus one change that removes work, such as guests ordering for themselves.

Raises also push up the pay of people already above the minimum, because they expect to stay ahead of new hires. Budget for that too.

How can scheduling software reduce labor cost?

Scheduling software reduces labor cost by showing what a schedule will cost before you publish it, and by enforcing the schedule at the time clock. A paper schedule can do neither.

RestauNax offers this as a paid add-on, Scheduling, timecards and tips. Because it is part of the same system as the POS, labor cost and labor percentage against projected sales update while you build the week, and those projections come from your own recent sales. Staff clock in on the register, and you choose whether an early or unscheduled clock-in is allowed, warned or needs a manager. Missed clock-outs and skipped breaks are flagged before payday. If you also want payroll run for you, Payroll is a separate add-on. To see it with your own numbers, book a free demo.

Frequently asked questions

What is the formula for labor cost percentage?

Labor cost percentage = total labor cost ÷ total sales × 100. Use net sales without tax or tips, and include wages, salaries, payroll taxes, workers' compensation and benefits.

Is 30% a good labor cost for a restaurant?

For a limited-service restaurant it matches the median reported by profitable operators in the National Restaurant Association's 2024 data (30.0%). For full service it would be better than the profitable median of 34.2%. Check it against your food cost: the two together matter more than either alone.

Do tips count toward labor cost?

No. Tips are paid by customers. The wages you pay tipped staff and the payroll taxes you owe on their reported tips are labor costs.

Should a manager's salary be included?

Yes. Include all salaries. The published benchmarks include them, so leaving them out makes your number look lower than it is.

How often should I check labor cost?

Check it weekly at a minimum, and by shift when you are trying to fix a problem. A monthly figure arrives too late to change the schedule that caused it.

What is sales per labor hour?

Sales per labor hour is net sales divided by total hours worked. It measures productivity without being affected by wage rates, so it is a good companion to labor cost percentage.

Tags:
restaurant labor cost percentage
labor cost
restaurant scheduling
prime cost
restaurant operations
restaurant payroll

About the Author
RestauNax Team
RestauNax Team

RestauNax

The team building RestauNax, writing about restaurant technology and the real cost of third-party delivery.